CAM Innovation - Transforming Thought into Process and Product
HomeHome AboutAbout CAM AboutHistory FacilityFacility & Resources ContactContact Russian Site Chinese Site
Home > Wire Harness and Taping Equipment > Manual Coil Taping Systems
 

Electric Motor Manufacturing Equipment Coil Manufacturing Systems Wire Harness Taping Equipment Custom Manufacturing and Automation Systems Motorshop Design Projects

Manual Coil Taping Systems
Rugged Machines designed for Continuous Work
CAM's manual taping machines are used to tape electric coils, wire harnesses and busss bars. These rugged, dependable machines are designed for continuous work. They can be used on practically all types and sizes of armature coils, buss bars, rods, ignition coils, wiring

harnesses and similar objects, both rigid and flexible. These machines are used throughout the wire harness industry and are also used for spiral taping many products, ranging from golf clubs and fishing rods to tool handles and magnetic coils.

36YD Taping Machine

A very reliable manual taping machine designed specifically to tape electric motor coils. Pictured here is a machine with adjustable height coil tables and coil slot guards.

Manual Coil Taping Machines     Manual Coil Taping Machines     Manual Coil Taping Machines

Manual Coil Taping Systems     Manual Coil Taping Machines
72YD Taping Machine

The 72 Yard Taping Machine is used primary to tape electric coils, harnesses and busss bars. This ultra reliable, simple machine has no gears, cams or other complex apparatus. Designed for hard continuous work, they are constructed of bronze, cast iron and steel. There are many optional attachments and accessories to customize the machine to better fit your taping application. The machine can be bench or floor stand mounted.

Pictured are the standard machine and a unit mounted on a worktable with optional custom guarding.
72YD Taping Machines
72YD Taping Machine

BCT Suspended Coil Taping Machine

The BCT is specifically designed for the application of tape insulation to motor coils and bars. Virtually no preparation or set-up time is required and both low or high resin tapes can be applied easily with greater accuracy and consistency. The unit's traverse reversing gearbox enables tape to be applied along the coil in both directions.

BCT Specifications:

BCT
Suspended Coil Taping Machine Range
BCT 16/30 BCT 20/50 BCT 25/75 BCT 35/100
BCT 16/30 BCT 20/50 BCT 25/75 BCT 35/100

CAPACITY
MAX. Cross section of conductor to be taped

5/8" x 1 3/16"

(16 mm x 30 mm)

3/4" x 2 "

(20 mm x 50 mm)

1" x 3 "

(25 mm x 75 mm)

1 3/8" x 4"

(35 mm x 102 mm)

TAPE WIDTH

3/4 "

(20 mm only)

3/4 "

(20 mm only)

3/4" (20 mm)

or 1" (25 mm)

3/4" (20 mm) or

1" (25 mm)

BUTT LAP
X
X
X
HALF LAP
TAPE SPOOL
1"
(25 mm core)

3 1/2"
(90 mm o.d)
1"
(25 mm core)

4 5/16"
(110 mm o.d.)
1" - 2 3/16"
(25 - 55 mm core)

6 11/16"
(170 mm o.d.)
1" - 2 3/16"
(25 - 55 mm core)

6 11/16"
(170 mm o.d.)
TAPING SPEED
250 rpm max.
240 rpm max.
200 rpm max.
200 rpm max.
DISTANCE
BETWEEN COIL
LEGS FOR ACCESS
4 1/2" min.
(115 mm minimum)
8" min.
(200 mm minimum)
12" min.
(300 mm minimum)
14" min.
(350 mm minimum)
TAPE TENSION
1-15 lbs.
(6.8 kg)
1-14 lbs.
(6.5 kg)
1-22 lbs.
(10 kg)
1-22 lbs.
(10 kg)
AIR SUPPLY
80 lbs/inch2 (5.5 Bar pressure)
RECOMMENDED MIN. BORE
1/2" (12 mm dia.)
FREE AIR USE @ FULL SPEED
38 CMF (18 litres/sec.)

CTS Coil Taping Station

CTS Coil Taping StationThis manual taping station is used with CAM's BCT taping head. It holds the coil horizontally and allows the taping head to be moved around the work piece. By mechanically driving the taping head along the length of the coil a constant tape overlap can be maintained. The coil clamping system is pneumatic and can be engaged or released to enable an operator to easily turn over the coil and tape the backside.

CAM Innovation, 215 Philadelphia Street, Hanover, PA 17331-2039 USA
(717) 637-5988 | Fax: (717) 637-9329
© Copyright CAM Innovation 2008