Model |
Type |
Description |
Distance Between Heads
MIN-MAX
|
Shaft Diameter
|
Maximum Armature Weight |
Mobility |
Stand
Length |
Floor to Center Line of Rollers MIN-MAX |
Stand
Width
|
Net
Weight
|
18959-C1
|
B |
Two separate, height adjustable, supports with heavy circular bases and one table. |
2 Separate Supports |
1 - 4 ½ in
25.4 -114.3 mm |
1000 lb
453.6 kg |
Moveable/
Stationary |
15 in
Diameter
381.0 mm
|
32 – 43 in
813 - 1092 mm |
15 in Diameter each
381.0 mm |
96 lb
43.5 kg |
18959-C2 |
B |
Same as above with two tables |
|
|
|
|
|
|
|
|
18959-C3 |
B |
Same as above without a table |
|
|
|
|
|
|
|
|
41017-D1 |
A |
Two cast iron standards on angle steel sills - 3-inch (76.2 mm) diameter roller bearing casters - heavy cast forks fitted with brass rollers 15/16 inch (23.8 mm) wide and 2 ½ inch (63.5 mm) diameter. |
17 - 39 in
432 – 991 mm |
1 - 4 ½ in
25.4 -114.3 mm |
1000 lb
453.6 kg |
Portable |
49 ¾ in
1263.6 mm |
32 - 40 ½ in
813 -1092 mm |
19 ½ in
495.3 mm |
265 lb
120.2 kg |
73725-C1 |
AS |
Type AS stand is constructed the same as Type A except that angle steel feet are substituted for casters. |
17 - 39 in
432 – 991 mm |
1 - 4 ½ in
25.4 - 114.3 mm |
2500 lb
1134.0 kg |
Stationary |
45 in
1143.0 mm |
32 - 41 in
813 -1041 mm |
18 ½ in
469.9 mm |
265 lb
120.2 kg |
41100-D1
|
AS-S |
Two heavy cast-iron standards mounted on angle steel sills. Supported stand moves on 6 in (152.4 mm) diameter roller bearing casters. Heavy cast forks fitted with brass rollers 1- ¼ in (31.7 mm) wide and 2-1/2 in (63.5 mm) diameter. |
17 – 43 3/4 in
432 – 1111 mm |
2 - 8 in
50.8 - 203.2 mm |
4500 lb
2041.2 kg |
Portable |
52 in
1320.8 mm |
29 - 33 in
737 - 838 mm |
21 13/16 in
554.0 mm |
350 lb
158.8 kg |
41100-D2 |
AS-S |
Same as above with Roller Brakes |
|
|
|
|
|
|
|
|
41100-D3 |
AS-S |
Same as above with Over-the-Top Clamping |
|
|
|
|
|
|
|
|
41101-D1
|
AS-SR |
Same as Type AS-S except with angle steel feet substituted for casters. Slow speed motor driven rollers on one end of stand controlled by portable footswitch. Standard electrics are 115 v, 1 ph, 60 hz – other electrics are available. |
17 – 43 3/4 in
432 – 1111 mm |
2 - 8 in
50.8 - 203.2 mm |
6500 lb
2948.4 kg |
Stationary |
52 in
1320.8 mm |
29 - 33 in
737 - 838 mm |
21 13/16 in
554.0 mm |
345 lb
156.5 kg |
41101-D2 |
|
Same as above with Roller Brakes |
|
|
|
|
|
|
|
|
41101-D3 |
|
Same as above with Over-the-Top Clamping |
|
|
|
|
|
|
|
|
69631-C1 |
F |
Type F stand is constructed similar to Type AS except that the maximum distance between heads is increased from 39 ¾ inch (1009.6 mm) to 66 inch (1676.4 mm) |
17 - 66 in
432 – 1676 mm |
1 - 4 ½ in
25.4 - 114.3 mm |
2500 lb
1134.0 kg |
Stationary |
71 ¼ in
1809.7 mm |
35 - 41 in
889-1041 mm |
18 ½ in
469.9 mm |
297 lb
134.7 kg |
90406-C2 |
FMD |
Similar to Type AS except sills and standards are more substantial. Cast forks are fitted with needle bearing rollers 2 in (50.8 mm) wide and 3 in (76.2 mm) in diameter. |
14 - 42 in
356 – 1067 mm |
3 - 8 in
76.2 - 203.2 mm |
9000 lb
4082.4 kg |
Stationary |
52 in
1320.8 mm |
35 - 40 in
889 -1016 mm |
18 5/8 in
473.1 mm |
340 lb
154.2 kg |
90406-C1 |
FM |
Stand is similar to FMD except that maximum distance between heads increased from 42 in (1066.8 mm) to 62 in (1574.8 mm) |
14 - 62 in
356 – 1575 mm |
3 - 8 in
76.2 - 203.2 mm |
9000 lb
4082.4 kg |
Stationary |
72 in
1828.8 mm |
35 - 40 in
889 -1016 mm |
18 5/8 in
473.1 mm |
355 lb
161.0 kg |
90406-C3 |
FML |
Same as the FM except that maximum distance between heads increased from 62 in (1574.8 mm) to 83-5/8 in (2124.1 mm) |
14 - 83 in
356 – 2108 mm |
3 - 8 in
76.2 - 203.2 mm |
9000 lb
4082.4 kg |
Stationary |
93 in
2362.2 mm |
35 - 40 in
889 -1016 mm |
18 5/8 in
473.1 mm |
375 lb
170.1 kg |
11460-D |
RS |
Motor Driven Rotation
Constructed of one high strength welded standard and one heavy cast-iron standard mounted on steel angle sills. |
14 - 43 13/16 in
427 - 1113 mm |
2 - 7 in
50.8 – 177.8 mm |
2500 lb
1134.0 kg |
Stationary |
52 in
1320.8 mm |
33 – 37 in
838 - 940 mm |
21 13/16 in
554.0 mm |
400 lb
181.4 kg |
11669 |
ARS |
Motor Driven Rotation
Constructed of two high strength welded standards mounted on angle steel sills. Supported stand moves on 6 in (152.4 mm) diameter casters. Armature rests are heavy cast forts fitted with roller bearing wheel and bonduthane rollers. |
10 – 49 3/4 in
254 – 1264 mm |
3 - 8 in *
76.2 - 203.2 mm |
9000 lb
4082.4 kg |
Stationary |
86 7/8 in
2206.6 mm |
40 3/4 in
1035 mm |
122 5/8 in
574.7 mm |
1100 lb
499.0 kg |
